B<CGI::Carp> - CGI routines for writing to the HTTPD error log |
CGI::Carp - CGI routines for writing to the HTTPD (or other) error log
use CGI::Carp;
croak "We're outta here!"; confess "It was my fault: $!"; carp "It was your fault!"; warn "I'm confused"; die "I'm dying.\n";
use CGI::Carp qw(cluck); cluck "I wouldn't do that if I were you";
use CGI::Carp qw(fatalsToBrowser); die "Fatal error messages are now sent to browser";
CGI scripts have a nasty habit of leaving warning messages in the error logs that are neither time stamped nor fully identified. Tracking down the script that caused the error is a pain. This fixes that. Replace the usual
use Carp;
with
use CGI::Carp
And the standard warn(), die (), croak(), confess()
and carp()
calls
will automagically be replaced with functions that write out nicely
time-stamped messages to the HTTP server error log.
For example:
[Fri Nov 17 21:40:43 1995] test.pl: I'm confused at test.pl line 3. [Fri Nov 17 21:40:43 1995] test.pl: Got an error message: Permission denied. [Fri Nov 17 21:40:43 1995] test.pl: I'm dying.
By default, error messages are sent to STDERR. Most HTTPD servers direct STDERR to the server's error log. Some applications may wish to keep private error logs, distinct from the server's error log, or they may wish to direct error messages to STDOUT so that the browser will receive them.
The carpout()
function is provided for this purpose. Since
carpout()
is not exported by default, you must import it explicitly by
saying
use CGI::Carp qw(carpout);
The carpout()
function requires one argument, which should be a
reference to an open filehandle for writing errors. It should be
called in a BEGIN
block at the top of the CGI application so that
compiler errors will be caught. Example:
BEGIN { use CGI::Carp qw(carpout); open(LOG, ">>/usr/local/cgi-logs/mycgi-log") or die("Unable to open mycgi-log: $!\n"); carpout(LOG); }
carpout()
does not handle file locking on the log for you at this point.
The real STDERR is not closed -- it is moved to CGI::Carp::SAVEERR. Some servers, when dealing with CGI scripts, close their connection to the browser when the script closes STDOUT and STDERR. CGI::Carp::SAVEERR is there to prevent this from happening prematurely.
You can pass filehandles to carpout()
in a variety of ways. The ``correct''
way according to Tom Christiansen is to pass a reference to a filehandle
GLOB:
carpout(\*LOG);
This looks weird to mere mortals however, so the following syntaxes are accepted as well:
carpout(LOG); carpout(main::LOG); carpout(main'LOG); carpout(\LOG); carpout(\'main::LOG');
... and so on
FileHandle and other objects work as well.
Use of carpout()
is not great for performance, so it is recommended
for debugging purposes or for moderate-use applications. A future
version of this module may delay redirecting STDERR until one of the
CGI::Carp methods is called to prevent the performance hit.
If you want to send fatal (die, confess) errors to the browser, ask to import the special ``fatalsToBrowser'' subroutine:
use CGI::Carp qw(fatalsToBrowser); die "Bad error here";
Fatal errors will now be echoed to the browser as well as to the log. CGI::Carp arranges to send a minimal HTTP header to the browser so that even errors that occur in the early compile phase will be seen. Nonfatal errors will still be directed to the log file only (unless redirected with carpout).
By default, the software error message is followed by a note to
contact the Webmaster by e-mail with the time and date of the error.
If this message is not to your liking, you can change it using the
set_message()
routine. This is not imported by default; you should
import it on the use()
line:
use CGI::Carp qw(fatalsToBrowser set_message); set_message("It's not a bug, it's a feature!");
You may also pass in a code reference in order to create a custom error message. At run time, your code will be called with the text of the error message that caused the script to die. Example:
use CGI::Carp qw(fatalsToBrowser set_message); BEGIN { sub handle_errors { my $msg = shift; print "<h1>Oh gosh</h1>"; print "<p>Got an error: $msg</p>"; } set_message(\&handle_errors); }
In order to correctly intercept compile-time errors, you should call
set_message()
from within a BEGIN{} block.
It is now also possible to make non-fatal errors appear as HTML
comments embedded in the output of your program. To enable this
feature, export the new ``warningsToBrowser'' subroutine. Since sending
warnings to the browser before the HTTP headers have been sent would
cause an error, any warnings are stored in an internal buffer until
you call the warningsToBrowser()
subroutine with a true argument:
use CGI::Carp qw(fatalsToBrowser warningsToBrowser); use CGI qw(:standard); print header(); warningsToBrowser(1);
You may also give a false argument to warningsToBrowser()
to prevent
warnings from being sent to the browser while you are printing some
content where HTML comments are not allowed:
warningsToBrowser(0); # disable warnings print "<script type=\"text/javascript\"><!--\n"; print_some_javascript_code(); print "//--></script>\n"; warningsToBrowser(1); # re-enable warnings
Note: In this respect warningsToBrowser()
differs fundamentally from
fatalsToBrowser(), which you should never call yourself!
1.05 carpout()
added and minor corrections by Marc Hedlund
<hedlund@best.com> on 11/26/95.
1.06 fatalsToBrowser()
no longer aborts for fatal errors within
eval()
statements.
1.08 set_message()
added and carpout()
expanded to allow for FileHandle
objects.
1.09 set_message()
now allows users to pass a code REFERENCE for
really custom error messages. croak and carp are now
exported by default. Thanks to Gunther Birznieks for the
patches.
1.10 Patch from Chris Dean (ctdean@cogit.com) to allow module to run correctly under mod_perl.
1.11 Changed order of > and < escapes.
1.12 Changed die()
on line 217 to CORE::die to avoid -w warning.
1.13 Added cluck()
to make the module orthogonal with Carp.
More mod_perl related fixes.
1.20 Patch from Ilmari Karonen (perl@itz.pp.sci.fi) Added
warningsToBrowser(). Replaced <CODE> tags with <PRE> in
fatalsToBrowser()
output.
1.23 ineval()
now checks both $^S and inspects the message for the ``eval'' pattern
(hack alert!) in order to accomodate various combinations of Perl and
mod_perl.
Copyright 1995-2002, Lincoln D. Stein. All rights reserved.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
Address bug reports and comments to: lstein@cshl.org
Carp, CGI::Base, CGI::BasePlus, CGI::Request, CGI::MiniSvr, CGI::Form, CGI::Response
B<CGI::Carp> - CGI routines for writing to the HTTPD error log |