File::Spec::Mac - File::Spec for Mac OS |
File::Spec::Mac - File::Spec for Mac OS (Classic)
require File::Spec::Mac; # Done internally by File::Spec if needed
Methods for manipulating file specifications.
catdir()
IMPORTANT NOTE: Beginning with version 1.3 of this module, the resulting
path is relative by default and not absolute. This descision was made due
to portability reasons. Since File::Spec->catdir()
returns relative paths
on all other operating systems, it will now also follow this convention on Mac
OS. Note that this may break some existing scripts.
The intended purpose of this routine is to concatenate directory names. But because of the nature of Macintosh paths, some additional possibilities are allowed to make using this routine give reasonable results for some common situations. In other words, you are also allowed to concatenate paths instead of directory names (strictly speaking, a string like ``:a'' is a path, but not a name, since it contains a punctuation character ``:'').
So, beside calls like
catdir("a") = ":a:" catdir("a","b") = ":a:b:" catdir() = "" (special case)
calls like the following
catdir(":a:") = ":a:" catdir(":a","b") = ":a:b:" catdir(":a:","b") = ":a:b:" catdir(":a:",":b:") = ":a:b:" catdir(":") = ":"
are allowed.
Here are the rules that are used in catdir()
; note that we try to be as
compatible as possible to Unix:
catdir(":::a","::b","c") = ":::a::b:c:" catdir(":::a::","::b","c") = ":::a:::b:c:"Adding a colon ``:'' or empty string ``'' to a path at any position doesn't alter the path, i.e. these arguments are ignored. (When a ``'' is passed as the first argument, it has a special meaning, see (6)). This way, a colon ``:'' is handled like a ``.'' (curdir) on Unix, while an empty string ``'' is generally ignored (see
Unix->canonpath()
). Likewise, a ``::'' is handled like a ``..''
(updir), and a ``:::'' is handled like a ``../..'' etc. E.g.
catdir("a",":",":","b") = ":a:b:" catdir("a",":","::",":b") = ":a::b:"If the first argument is an empty string ``'' or is a volume name, i.e. matches the pattern /^[^:]+:/, the resulting path is absolute. Passing an empty string ``'' as the first argument to
catdir()
is
like passingFile::Spec->rootdir()
as the first argument, i.e.
catdir("","a","b") is the same as
catdir(rootdir(),"a","b").
This is true on Unix, where catdir("","a","b")
yields ``/a/b'' and
rootdir()
is ``/''. Note that rootdir()
on Mac OS is the startup
volume, which is the closest in concept to Unix' ``/''. This should help
to run existing scripts originally written for Unix.
Unix: Unix->catdir("","") = "/" Unix->catdir("",".") = "/" Unix->catdir("","..") = "/" # can't go beyond root Unix->catdir("",".","..","..","a") = "/a" Mac: Mac->catdir("","") = rootdir() # (e.g. "HD:") Mac->catdir("",":") = rootdir() Mac->catdir("","::") = rootdir() # can't go beyond root Mac->catdir("",":","::","::","a") = rootdir() . "a:" # (e.g. "HD:a:")
However, this approach is limited to the first arguments following
``root'' (again, see Unix->canonpath()
). If there are more
arguments that move up the directory tree, an invalid path going
beyond root can be created.
As you've seen, you can force catdir()
to create an absolute path
by passing either an empty string or a path that begins with a volume
name as the first argument. However, you are strongly encouraged not
to do so, since this is done only for backward compatibility. Newer
versions of File::Spec come with a method called catpath()
(see
below), that is designed to offer a portable solution for the creation
of absolute paths. It takes volume, directory and file portions and
returns an entire path. While catdir()
is still suitable for the
concatenation of directory names, you are encouraged to use
catpath()
to concatenate volume names and directory
paths. E.g.
$dir = File::Spec->catdir("tmp","sources"); $abs_path = File::Spec->catpath("MacintoshHD:", $dir,"");
yields
"MacintoshHD:tmp:sources:" .
IMPORTANT NOTE: Beginning with version 1.3 of this module, the
resulting path is relative by default and not absolute. This
descision was made due to portability reasons. Since
File::Spec->catfile()
returns relative paths on all other
operating systems, it will now also follow this convention on Mac OS.
Note that this may break some existing scripts.
The last argument is always considered to be the file portion. Since
catfile()
uses catdir()
(see above) for the concatenation of the
directory portions (if any), the following with regard to relative and
absolute paths is true:
catfile("") = "" catfile("file") = "file"
but
catfile("","") = rootdir() # (e.g. "HD:") catfile("","file") = rootdir() . file # (e.g. "HD:file") catfile("HD:","file") = "HD:file"
This means that catdir()
is called only when there are two or more
arguments, as one might expect.
Note that the leading ``:'' is removed from the filename, so that
catfile("a","b","file") = ":a:b:file" and
catfile("a","b",":file") = ":a:b:file"
give the same answer.
To concatenate volume names, directory paths and filenames,
you are encouraged to use catpath()
(see below).
If Mac::Files could not be loaded, the empty string is returned.
E.g.
File::Spec->file_name_is_absolute("a"); # false (relative) File::Spec->file_name_is_absolute(":a:b:"); # false (relative) File::Spec->file_name_is_absolute("MacintoshHD:"); # true (absolute) File::Spec->file_name_is_absolute(""); # true (absolute)
($volume,$directories,$file) = File::Spec->splitpath( $path ); ($volume,$directories,$file) = File::Spec->splitpath( $path, $no_file );
Splits a path in to volume, directory, and filename portions.
On Mac OS, assumes that the last part of the path is a filename unless $no_file is true or a trailing separator ``:'' is present.
The volume portion is always returned with a trailing ``:''. The directory portion is always returned with a leading (to denote a relative path) and a trailing ``:'' (to denote a directory). The file portion is always returned without a leading ``:''. Empty portions are returned as empty string ''.
The results can be passed to catpath()
to get back a path equivalent to
(usually identical to) the original path.
catdir()
.
@dirs = File::Spec->splitdir( $directories );
$directories should be only the directory portion of the path on systems
that have the concept of a volume or that have path syntax that differentiates
files from directories. Consider using splitpath()
otherwise.
Unlike just splitting the directories on the separator, empty directory names
(""
) can be returned. Since catdir()
on Mac OS always appends a trailing
colon to distinguish a directory path from a file path, a single trailing colon
will be ignored, i.e. there's no empty directory name after it.
Hence, on Mac OS, both
File::Spec->splitdir( ":a:b::c:" ); and File::Spec->splitdir( ":a:b::c" );
yield:
( "a", "b", "::", "c")
while
File::Spec->splitdir( ":a:b::c::" );
yields:
( "a", "b", "::", "c", "::")
$path = File::Spec->catpath($volume,$directory,$file);
Takes volume, directory and file portions and returns an entire path. On Mac OS, $volume, $directory and $file are concatenated. A ':' is inserted if need be. You may pass an empty string for each portion. If all portions are empty, the empty string is returned. If $volume is empty, the result will be a relative path, beginning with a ':'. If $volume and $directory are empty, a leading ``:'' (if any) is removed form $file and the remainder is returned. If $file is empty, the resulting path will have a trailing ':'.
$rel_path = File::Spec->abs2rel( $path ) ; $rel_path = File::Spec->abs2rel( $path, $base ) ;
Note that both paths are assumed to have a notation that distinguishes a directory path (with trailing ':') from a file path (without trailing ':').
If $base is not present or '', then the current working directory is used.
If $base is relative, then it is converted to absolute form using rel2abs()
.
This means that it is taken to be relative to the current working directory.
Since Mac OS has the concept of volumes, this assumes that both paths are on the $destination volume, and ignores the $base volume (!).
If $base doesn't have a trailing colon, the last element of $base is assumed to be a filename. This filename is ignored (!). Otherwise all path components are assumed to be directories.
If $path is relative, it is converted to absolute form using rel2abs()
.
This means that it is taken to be relative to the current working directory.
Based on code written by Shigio Yamaguchi.
$abs_path = File::Spec->rel2abs( $path ) ; $abs_path = File::Spec->rel2abs( $path, $base ) ;
Note that both paths are assumed to have a notation that distinguishes a directory path (with trailing ':') from a file path (without trailing ':').
If $base is not present or '', then $base is set to the current working
directory. If $base is relative, then it is converted to absolute form
using rel2abs()
. This means that it is taken to be relative to the
current working directory.
If $base doesn't have a trailing colon, the last element of $base is assumed to be a filename. This filename is ignored (!). Otherwise all path components are assumed to be directories.
If $path is already absolute, it is returned and $base is ignored.
Based on code written by Shigio Yamaguchi.
See the authors list in File::Spec. Mac OS support by Paul Schinder <schinder@pobox.com> and Thomas Wegner <wegner_thomas@yahoo.com>.
File::Spec::Mac - File::Spec for Mac OS |