perlapio - perl's IO abstraction interface. |
perlapio - perl's IO abstraction interface.
#define PERLIO_NOT_STDIO 0 /* For co-existence with stdio only */ #include <perlio.h> /* Usually via #include <perl.h> */
PerlIO *PerlIO_stdin(void); PerlIO *PerlIO_stdout(void); PerlIO *PerlIO_stderr(void);
PerlIO *PerlIO_open(const char *path,const char *mode); PerlIO *PerlIO_fdopen(int fd, const char *mode); PerlIO *PerlIO_reopen(const char *path, const char *mode, PerlIO *old); /* deprecated */ int PerlIO_close(PerlIO *f);
int PerlIO_stdoutf(const char *fmt,...) int PerlIO_puts(PerlIO *f,const char *string); int PerlIO_putc(PerlIO *f,int ch); int PerlIO_write(PerlIO *f,const void *buf,size_t numbytes); int PerlIO_printf(PerlIO *f, const char *fmt,...); int PerlIO_vprintf(PerlIO *f, const char *fmt, va_list args); int PerlIO_flush(PerlIO *f);
int PerlIO_eof(PerlIO *f); int PerlIO_error(PerlIO *f); void PerlIO_clearerr(PerlIO *f);
int PerlIO_getc(PerlIO *d); int PerlIO_ungetc(PerlIO *f,int ch); int PerlIO_read(PerlIO *f, void *buf, size_t numbytes);
int PerlIO_fileno(PerlIO *f);
void PerlIO_setlinebuf(PerlIO *f);
Off_t PerlIO_tell(PerlIO *f); int PerlIO_seek(PerlIO *f, Off_t offset, int whence); void PerlIO_rewind(PerlIO *f);
int PerlIO_getpos(PerlIO *f, SV *save); /* prototype changed */ int PerlIO_setpos(PerlIO *f, SV *saved); /* prototype changed */
int PerlIO_fast_gets(PerlIO *f); int PerlIO_has_cntptr(PerlIO *f); int PerlIO_get_cnt(PerlIO *f); char *PerlIO_get_ptr(PerlIO *f); void PerlIO_set_ptrcnt(PerlIO *f, char *ptr, int count);
int PerlIO_canset_cnt(PerlIO *f); /* deprecated */ void PerlIO_set_cnt(PerlIO *f, int count); /* deprecated */
int PerlIO_has_base(PerlIO *f); char *PerlIO_get_base(PerlIO *f); int PerlIO_get_bufsiz(PerlIO *f);
PerlIO *PerlIO_importFILE(FILE *stdio, const char *mode); FILE *PerlIO_exportFILE(PerlIO *f, int flags); FILE *PerlIO_findFILE(PerlIO *f); void PerlIO_releaseFILE(PerlIO *f,FILE *stdio);
int PerlIO_apply_layers(PerlIO *f, const char *mode, const char *layers); int PerlIO_binmode(PerlIO *f, int ptype, int imode, const char *layers); void PerlIO_debug(const char *fmt,...)
Perl's source code, and extensions that want maximum portability,
should use the above functions instead of those defined in ANSI C's
stdio.h. The perl headers (in particular ``perlio.h'') will
#define
them to the I/O mechanism selected at Configure time.
The functions are modeled on those in stdio.h, but parameter order has been ``tidied up a little''.
PerlIO *
takes the place of FILE *. Like FILE * it should be
treated as opaque (it is probably safe to assume it is a pointer to
something).
There are currently three implementations:
This is the only implementation for which PerlIO_apply_layers()
does anything ``interesting''.
The USE_PERLIO implementation is described in the perliol manpage.
Because ``perlio.h'' is a thin layer (for efficiency) the semantics of these functions are somewhat dependent on the underlying implementation. Where these variations are understood they are noted below.
Unless otherwise noted, functions return 0 on success, or a negative
value (usually EOF
which is usually -1) and set errno
on error.
stdin
, stdout
, stderr
. They are written
to look like ``function calls'' rather than variables because this makes
it easier to make them function calls if platform cannot export data
to loaded modules, or if (say) different ``threads'' might have different
values.
fopen()/fdopen()
and the arguments are the same.
Return NULL
and set errno
if there is an error. There may be an
implementation limit on the number of open handles, which may be lower
than the limit on the number of open files - errno
may not be set
when NULL
is returned if this limit is exceeded.
Perl prefers to dup
the new low-level descriptor to the descriptor
used by the existing PerlIO. This may become the behaviour of this
function in the future.
fprintf()/vfprintf()
equivalents.
printf()
equivalent. printf is #defined to this function,
so it is (currently) legal to use printf(fmt,...)
in perl sources.
fread()
and fwrite(). Note that arguments are
different, there is only one ``count'' and order has ``file''
first. Returns a byte count if successful (which may be zero or positive), returns
negative value and sets errno
on error. Depending on
implementation errno
may be EINTR
if operation was interrupted
by a signal.
errno
may be EINTR
if operation was
interrupted by a signal.
fputs()
and fputc().
Note that arguments have been revised to have ``file'' first.
EOF
) on error. The number of bytes that can be
``pushed back'' may vary, only 1 character is certain, and then only if
it is the last character that was read from the handle.
EOF
) on error.
NULL
this may flush all open
streams (or core dump with some USE_STDIO implementattions).
Calling on a handle open for read only, or on which last operation was a read of some kind
may lead to undefined behaviour on some USE_STDIO implementations.
The USE_PERLIO (layers) implementation tries to behave better: it flushes all open streams
when passed NULL
, and attempts to retain data on read streams either in the buffer
or by seeking the handle to the current logical position.
PerlIO_flush()
above). Offset is
of type Off_t
which is a perl Configure value which may not be same
as stdio's off_t
.
Off_t
which is a perl
Configure value which may not be same as stdio's off_t
.
fgetpos()
and fsetpos(). Rather than
stdio's Fpos_t they expect a ``Perl Scalar Value'' to be passed. What is
stored there should be considered opaque. The layout of the data may
vary from handle to handle. When not using stdio or if platform does
not have the stdio calls then they are implemented in terms of
PerlIO_tell()
and PerlIO_seek().
PerlIO_seek(f,(Off_t)0L, SEEK_SET); PerlIO_clearerr(f);
unlink
-ed just after
it is created so it does not matter how it gets closed. On other
systems the file may only be deleted if closed via PerlIO_close()
and/or the program exits via exit
. Depending on the implementation
there may be ``race conditions'' which allow other processes access to
the file, though in general it will be safer in this regard than
ad. hoc. schemes.
There is outline support for co-existence of PerlIO with stdio. Obviously if PerlIO is implemented in terms of stdio there is no problem. However in other cases then mechanisms must exist to create a FILE * which can be passed to library code which is going to use stdio calls.
The first step is to add this line:
#define PERLIO_NOT_STDIO 0
before including any perl header files. (This will probably become the default at some point). That prevents ``perlio.h'' from attempting to #define stdio functions onto PerlIO functions.
XS code is probably better using ``typemap'' if it expects FILE * arguments. The standard typemap will be adjusted to comprehend any changes in this area.
The mode argument should be a string as would be passed to fopen/PerlIO_open. If it is NULL then - for legacy support - the code will (depending upon the platform and the implementation) either attempt to empirically determine the mode in which f is open, or use ``r+'' to indicate a read/write stream.
Once called the FILE * should ONLY be closed by calling
PerlIO_close()
on the returned PerlIO *.
The PerlIO is set to textmode. Use PerlIO_binmode if this is not the desired mode.
This is not the reverse of PerlIO_exportFILE().
The fact that such a FILE * has been 'exported' is recorded, (normally by
pushing a new :stdio ``layer'' onto the PerlIO *), which may affect future
PerlIO operations on the original PerlIO *.
You should not call fclose()
on the file unless you call
PerlIO_releaseFILE()
to disassociate it from the PerlIO *.
(Do not use PerlIO_importFILE()
for doing the disassociation.)
Calling this function repeatedly will create a FILE * on each call (and will push an :stdio layer each time as well).
Use this to disassociate a file from a PerlIO * that was associated using PerlIO_exportFILE().
PerlIO_close()
.
In addition to standard-like API defined so far above there is an ``implementation'' interface which allows perl to get at internals of PerlIO. The following calls correspond to the various FILE_xxx macros determined by Configure - or their equivalent in other implementations. This section is really of interest to only those concerned with detailed perl-core behaviour, implementing a PerlIO mapping or writing code which can make use of the ``read ahead'' that has been done by the IO system in the same way perl does. Note that any code that uses these interfaces must be prepared to do things the traditional way if a handle does not support them.
sv_gets
to ``bypass'' normal IO mechanism.
This can vary from handle to handle.
PerlIO_fast_gets(f) = PerlIO_has_cntptr(f) && \ PerlIO_canset_cnt(f) && \ `Can set pointer into buffer'
PerlIO_get_cnt()
has returned
a positive value. Only positive offsets up to value returned by
PerlIO_get_cnt()
are allowed.
PerlIO_get_ptr
and PerlIO_get_cnt
. The two
values must be consistent with each other (implementation may only
use one or the other or may require both).
PerlIO_canset_cnt()
returns true. Currently used in only doio.c to
force count less than -1 to -1. Perhaps should be PerlIO_set_empty or
similar. This call may actually do nothing if ``count'' is deduced from
pointer and a ``limit''. Do not use this - use PerlIO_set_ptrcnt().
read()
(or whatever) last time IO was requested.
PerlIO_apply_layers(f,mode,layers)
PerlIO_binmode()
below for the portable case.
PerlIO_binmode(f,ptype,imode,layers)
binmode
operator.
ptype is perl's character for the kind of IO:
imode is O_BINARY
or O_TEXT
.
layers is a string of layers to apply, only ``:crlf'' makes sense in the non USE_PERLIO case. (As of perl5.8 ``:raw'' is deprecated in favour of passing NULL.)
Portable cases are:
PerlIO_binmode(f,ptype,O_BINARY,Nullch); and PerlIO_binmode(f,ptype,O_TEXT,":crlf");
On Unix these calls probably have no effect whatsoever. Elsewhere they alter ``\n'' to CR,LF translation and possibly cause a special text ``end of file'' indicator to be written or honoured on read. The effect of making the call after doing any IO to the handle depends on the implementation. (It may be ignored, affect any data which is already buffered as well, or only apply to subsequent data.)
PerlIO_debug(fmt,...)
warn()
etc. would recursively call PerlIO and be a
problem.
PerlIO_debug writes to the file named by $ENV{'PERLIO_DEBUG'} typical use might be
Bourne shells (sh, ksh, bash, zsh, ash, ...): PERLIO_DEBUG=/dev/tty ./perl somescript some args
Csh/Tcsh: setenv PERLIO_DEBUG /dev/tty ./perl somescript some args
If you have the "env" utility: env PERLIO_DEBUG=/dev/tty ./perl somescript some args
Win32: set PERLIO_DEBUG=CON perl somescript some args
If $ENV{'PERLIO_DEBUG'} is not set PerlIO_debug()
is a no-op.
perlapio - perl's IO abstraction interface. |