Networking >> VPN >> Clients >> OpenConnect >> What is the syntax of the openconnect vpn client for windowsOPENCONNECTNAME NAMEopenconnect - Connect to Cisco AnyConnect VPN SYNOPSIS
DESCRIPTIONThe program openconnect connects to Cisco "AnyConnect" VPN servers, which use standard TLS and DTLS protocols for data transport. The connection happens in two phases. First there is a simple HTTPS connection over which the user authenticates somehow - by using a certificate, or password or SecurID, etc. Having authenticated, the user is rewarded with an HTTP cookie which can be used to make the real VPN connection. The second phase uses that cookie in an HTTPS CONNECT request, and data packets can be passed over the resulting connection. In auxiliary headers exchanged with the CONNECT request, a Session-ID and Master Secret for a DTLS connection are also exchanged, which allows data transport over UDP to occur. OPTIONS--config=CONFIGFILE Read further options from CONFIGFILE before continuing to process options from the command line. The file should contain long-format options as would be accepted on the command line, but without the two leading -- dashes. Empty lines, or lines where the first non-space character is a # character, are ignored. Any option except the config option may be specified in the file. -b,--background Continue in background after startup --pid-file=PIDFILE Save the pid to PIDFILE when backgrounding -c,--certificate=CERT Use SSL client certificate CERT which may be either a file name or, if OpenConnect has been built with an appropriate version of GnuTLS, a PKCS#11 URL. -e,--cert-expire-warning=DAYS Give a warning when SSL client certificate has DAYS left before expiry -k,--sslkey=KEY Use SSL private key KEY which may be either a file name or, if OpenConnect has been built with an appropriate version of GnuTLS, a PKCS#11 URL. -C,--cookie=COOKIE Use WebVPN cookie. COOKIE --cookie-on-stdin Read cookie from standard input. -d,--deflate Enable all compression, including stateful modes. By default, only stateless compression algorithms are enabled. -D,--no-deflate Disable all compression. --compression=MODE Set compression mode, where MODE is one of stateless , none , or all . By default, only stateless compression algorithms which do not maintain state from one packet to the next (and which can be used on UDP transports) are enabled. By setting the mode to all stateful algorithms (currently only zlib deflate) can be enabled. Or all compression can be disabled by setting the mode to none . --force-dpd=INTERVAL Use INTERVAL as minimum Dead Peer Detection interval for CSTP and DTLS, forcing use of DPD even when the server doesn’t request it. -g,--usergroup=GROUP Use GROUP as login UserGroup -h,--help Display help text --http-auth=METHODS Use only the specified methods for HTTP authentication to a server. By default, only Negotiate, NTLM and Digest authentication are enabled. Basic authentication is also supported but because it is insecure it must be explicitly enabled. The argument is a comma-separated list of methods to be enabled. Note that the order does not matter: OpenConnect will use Negotiate, NTLM, Digest and Basic authentication in that order, if each is enabled, regardless of the order specified in the METHODS string. -i,--interface=IFNAME Use IFNAME for tunnel interface -l,--syslog Use syslog for progress messages --timestamp Prepend a timestamp to each progress message -U,--setuid=USER Drop privileges after connecting, to become user USER --csd-user=USER Drop privileges during CSD (Cisco Secure Desktop) script execution. --csd-wrapper=SCRIPT Run SCRIPT instead of the CSD (Cisco Secure Desktop) script. -m,--mtu=MTU Request MTU from server as the MTU of the tunnel. --basemtu=MTU Indicate MTU as the path MTU between client and server on the unencrypted network. Newer servers will automatically calculate the MTU to be used on the tunnel from this value. -p,--key-password=PASS Provide passphrase for certificate file, or SRK (System Root Key) PIN for TPM -P,--proxy=PROXYURL Use HTTP or SOCKS proxy for connection. A username and password can be provided in the given URL, and will be used for authentication. If authentication is required but no credentials are given, GSSAPI and automatic NTLM authentication using Samba’s ntlm_auth helper tool may be attempted. --proxy-auth=METHODS Use only the specified methods for HTTP authentication to a proxy. By default, only Negotiate, NTLM and Digest authentication are enabled. Basic authentication is also supported but because it is insecure it must be explicitly enabled. The argument is a comma-separated list of methods to be enabled. Note that the order does not matter: OpenConnect will use Negotiate, NTLM, Digest and Basic authentication in that order, if each is enabled, regardless of the order specified in the METHODS string. --no-proxy Disable use of proxy --libproxy Use libproxy to configure proxy automatically (when built with libproxy support) --key-password-from-fsid Passphrase for certificate file is automatically generated from the fsid of the file system on which it is stored. The fsid is obtained from the statvfs(2) or statfs(2) system call, depending on the operating system. On a Linux or similar system with GNU coreutils, the fsid used by this option should be equal to the output of the command: stat --file-system --printf=%i\n $CERTIFICATE It is not the same as the 128-bit UUID of the file system. -q,--quiet Less output -Q,--queue-len=LEN Set packet queue limit to LEN pkts -s,--script=SCRIPT Invoke SCRIPT to configure the network after connection. Without this, routing and name service are unlikely to work correctly. The script is expected to be compatible with the vpnc-script which is shipped with the "vpnc" VPN client. See http://www.infradead.org/openconnect/vpnc-script.html for more information. This version of OpenConnect is configured to use /etc/vpnc/vpnc-script by default. On Windows, a relative directory for the default script will be handled as starting from the directory that the openconnect executable is running from, rather than the current directory. The script will be invoked with the command-based script host cscript.exe. -S,--script-tun Pass traffic to ’script’ program over a UNIX socket, instead of to a kernel tun/tap device. This allows the VPN IP traffic to be handled entirely in userspace, for example by a program which uses lwIP to provide SOCKS access into the VPN. -u,--user=NAME Set login username to NAME -V,--version Report version number -v,--verbose More output (may be specified multiple times for additional output) -x,--xmlconfig=CONFIG XML config file --authgroup=GROUP Choose authentication login selection --authenticate Authenticate only, and output the information needed to make the connection a form which can be used to set shell environment variables. When invoked with this option, openconnect will not make the connection, but if successful will output something like the following to stdout: --cookieonly Fetch webvpn cookie only; don’t connect --printcookie Print webvpn cookie before connecting --cafile=FILE Cert file for server verification --disable-ipv6 Do not advertise IPv6 capability to server --dtls-ciphers=LIST Set OpenSSL ciphers to support for DTLS --dtls-local-port=PORT Use PORT as the local port for DTLS datagrams --dump-http-traffic Enable verbose output of all HTTP requests and the bodies of all responses received from the server. --no-cert-check Do not require server SSL certificate to be valid. Checks will still happen and failures will cause a warning message, but the connection will continue anyway. You should not need to use this option - if your servers have SSL certificates which are not signed by a trusted Certificate Authority, you can still add them (or your private CA) to a local file and use that file with the --cafile option. --no-system-trust Do not trust the system default certificate authorities. If this option is given, only certificate authorities given with the --cafile option, if any, will be trusted automatically.
PFS is available in Cisco ASA releases 9.1(2) and higher; a suitable cipher suite may need to be manually enabled by the administrator using the ssl encryption setting. --no-dtls Disable DTLS --no-http-keepalive Version 8.2.2.5 of the Cisco ASA software has a bug where it will forget the client’s SSL certificate when HTTP connections are being re-used for multiple requests. So far, this has only been seen on the initial connection, where the server gives an HTTP/1.0 redirect response with an explicit Connection: Keep-Alive directive. OpenConnect as of v2.22 has an unconditional workaround for this, which is never to obey that directive after an HTTP/1.0 response. However, Cisco’s support team has failed to give any competent response to the bug report and we don’t know under what other circumstances their bug might manifest itself. So this option exists to disable ALL re-use of HTTP sessions and cause a new connection to be made for each request. If your server seems not to be recognising your certificate, try this option. If it makes a difference, please report this information to the openconnect-devel@lists.infradead.org mailing list. --no-passwd Never attempt password (or SecurID) authentication. --no-xmlpost Do not attempt to post an XML authentication/configuration request to the server; use the old style GET method which was used by older clients and servers instead. This option is a temporary safety net, to work around potential compatibility issues with the code which falls back to the old method automatically. It causes OpenConnect to behave more like older versions (4.08 and below) did. If you find that you need to use this option, then you have found a bug in OpenConnect. Please see http://www.infradead.org/openconnect/mail.html and report this to the developers. --non-inter Do not expect user input; exit if it is required. --passwd-on-stdin Read password from standard input --token-mode=MODE Enable one-time password generation using the MODE algorithm. --token-mode=rsa will call libstoken to generate an RSA SecurID tokencode, --token-mode=totp will call liboath to generate an RFC 6238 time-based password, and --token-mode=hotp will call liboath to generate an RFC 4226 HMAC-based password. Yubikey tokens which generate OATH codes in hardware are supported with --token-mode=yubioath --token-secret={ SECRET[,COUNTER] | @FILENAME } The secret to use when generating one-time passwords/verification codes. Base 32-encoded TOTP/HOTP secrets can be used by specifying "base32:" at the beginning of the secret, and for HOTP secrets the token counter can be specified following a comma. RSA SecurID secrets can be specified as an Android/iPhone URI or a raw numeric CTF string (with or without dashes). For Yubikey OATH the token secret specifies the name of the credential to be used. If not provided, the first OATH credential found on the device will be used. FILENAME, if specified, can contain any of the above strings. Or, it can contain a SecurID XML (SDTID) seed. If this option is omitted, and --token-mode is "rsa", libstoken will try to use the software token seed saved in ~/.stokenrc by the "stoken import" command. --reconnect-timeout Keep reconnect attempts until so much seconds are elapsed. The default timeout is 300 seconds, which means that openconnect can recover VPN connection after a temporary network down time of 300 seconds. --servercert=SHA1 Accept server’s SSL certificate only if its fingerprint matches SHA1. --useragent=STRING Use STRING as ’User-Agent:’ field value in HTTP header. (e.g. --useragent ’Cisco AnyConnect VPN Agent for Windows 2.2.0133’) --os=STRING OS type to report to gateway. Recognized values are: linux, linux-64, win, mac-intel, android, apple-ios. Reporting a different OS type may affect the dynamic access policy (DAP) applied to the VPN session. If the gateway requires CSD, it will also cause the corresponding CSD trojan binary to be downloaded, so you may need to use --csd-wrapper if this code is not executable on the local machine. SIGNALSIn the data phase of the connection, the following signals are handled:
SIGUSR2 forces an immediate disconnection and reconnection; this can be used to quickly recover from LAN IP address changes. SIGTERM exits immediately without logging off or running vpnc-script. LIMITATIONSNote that although IPv6 has been tested on all platforms on which openconnect is known to run, it depends on a suitable vpnc-script to configure the network. The standard vpnc-script shipped with vpnc 0.5.3 is not capable of setting up IPv6 routes; the one from git://git.infradead.org/users/dwmw2/vpnc-scripts.git will be required. AUTHORSDavid Woodhouse <dwmw2@infradead.org> |