compress
Old versions of log files are compressed with gzip(1) by default. See also nocompress.
compresscmd
Specifies which command to use to compress log files. The default is gzip. See also compress.
uncompresscmd
Specifies which command to use to uncompress log files. The default is gunzip.
compressext
Specifies which extension to use on compressed logfiles, if compression is enabled. The default follows that of the configured compression command.
compressoptions
Command line options may be passed to the compression program, if one is in use. The default, for gzip(1), is "-6" (biased towards high compression at the expense of
speed). If you use a different compression command, you may need to change the compressoptions to match.
copy Make a copy of the log file, but don't change the original at all. This option can be used, for instance, to make a snapshot of the current log file, or when some other
utility needs to truncate or parse the file. When this option is used, the create option will have no effect, as the old log file stays in place.
copytruncate
Truncate the original log file in place after creating a copy, instead of moving the old log file and optionally creating a new one. It can be used when some program
cannot be told to close its logfile and thus might continue writing (appending) to the previous log file forever. Note that there is a very small time slice between
copying the file and truncating it, so some logging data might be lost. When this option is used, the create option will have no effect, as the old log file stays in
place.
create mode owner group, create owner group
Immediately after rotation (before the postrotate script is run) the log file is created (with the same name as the log file just rotated). mode specifies the mode for
the log file in octal (the same as chmod(2)), owner specifies the user name who will own the log file, and group specifies the group the log file will belong to. Any of
the log file attributes may be omitted, in which case those attributes for the new file will use the same values as the original log file for the omitted attributes. This
option can be disabled using the nocreate option.
createolddir mode owner group
If the directory specified by olddir directive does not exist, it is created. mode specifies the mode for the olddir directory in octal (the same as chmod(2)), owner
specifies the user name who will own the olddir directory, and group specifies the group the olddir directory will belong to. This option can be disabled using the nocre‐
ateolddir option.
daily Log files are rotated every day.
dateext
Archive old versions of log files adding a date extension like YYYYMMDD instead of simply adding a number. The extension may be configured using the dateformat and
dateyesterday options.
dateformat format_string
Specify the extension for dateext using the notation similar to strftime(3) function. Only %Y %m %d %H and %s specifiers are allowed. The default value is -%Y%m%d except
hourly, which uses -%Y%m%d%H as default value. Note that also the character separating log name from the extension is part of the dateformat string. The system clock
must be set past Sep 9th 2001 for %s to work correctly. Note that the datestamps generated by this format must be lexically sortable (i.e., first the year, then the
month then the day. e.g., 2001/12/01 is ok, but 01/12/2001 is not, since 01/11/2002 would sort lower while it is later). This is because when using the rotate option,
logrotate sorts all rotated filenames to find out which logfiles are older and should be removed.
dateyesterday
Use yesterday's instead of today's date to create the dateext extension, so that the rotated log file has a date in its name that is the same as the timestamps within it.
delaycompress
Postpone compression of the previous log file to the next rotation cycle. This only has effect when used in combination with compress. It can be used when some program
cannot be told to close its logfile and thus might continue writing to the previous log file for some time.
extension ext
Log files with ext extension can keep it after the rotation. If compression is used, the compression extension (normally .gz) appears after ext. For example you have
a logfile named mylog.foo and want to rotate it to mylog.1.foo.gz instead of mylog.foo.1.gz.
hourly Log files are rotated every hour. Note that usually logrotate is configured to be run by cron daily. You have to change this configuration and run logrotate hourly to be
able to really rotate logs hourly.
ifempty
Rotate the log file even if it is empty, overriding the notifempty option (ifempty is the default).
include file_or_directory
Reads the file given as an argument as if it was included inline where the include directive appears. If a directory is given, most of the files in that directory are
read in alphabetic order before processing of the including file continues. The only files which are ignored are files which are not regular files (such as directories
and named pipes) and files whose names end with one of the taboo extensions, as specified by the tabooext directive.
mail address
When a log is rotated out-of-existence, it is mailed to address. If no mail should be generated by a particular log, the nomail directive may be used.
mailfirst
When using the mail command, mail the just-rotated file, instead of the about-to-expire file.
maillast
When using the mail command, mail the about-to-expire file, instead of the just-rotated file (this is the default).
maxage count
Remove rotated logs older than <count> days. The age is only checked if the logfile is to be rotated. The files are mailed to the configured address if maillast and mail
are configured.
maxsize size
Log files are rotated when they grow bigger than size bytes even before the additionally specified time interval (daily, weekly, monthly, or yearly). The related size
option is similar except that it is mutually exclusive with the time interval options, and it causes log files to be rotated without regard for the last rotation time.
When maxsize is used, both the size and timestamp of a log file are considered.
minsize size
Log files are rotated when they grow bigger than size bytes, but not before the additionally specified time interval (daily, weekly, monthly, or yearly). The related
size option is similar except that it is mutually exclusive with the time interval options, and it causes log files to be rotated without regard for the last rotation
time. When minsize is used, both the size and timestamp of a log file are considered.
missingok
If the log file is missing, go on to the next one without issuing an error message. See also nomissingok.
monthly
Log files are rotated the first time logrotate is run in a month (this is normally on the first day of the month).
nocompress
Old versions of log files are not compressed. See also compress.
nocopy Do not copy the original log file and leave it in place. (this overrides the copy option).
nocopytruncate
Do not truncate the original log file in place after creating a copy (this overrides the copytruncate option).
nocreate
New log files are not created (this overrides the create option).
nocreateolddir
olddir directory is not created by logrotate when it does not exist.
nodelaycompress
Do not postpone compression of the previous log file to the next rotation cycle (this overrides the delaycompress option).
nodateext
Do not archive old versions of log files with date extension (this overrides the dateext option).
nomail Don't mail old log files to any address.
nomissingok
If a log file does not exist, issue an error. This is the default.
noolddir
Logs are rotated in the same directory the log normally resides in (this overrides the olddir option).
nosharedscripts
Run prerotate and postrotate scripts for every log file which is rotated (this is the default, and overrides the sharedscripts option). The absolute path to the log file
is passed as first argument to the script. If the scripts exit with error, the remaining actions will not be executed for the affected log only.
noshred
Do not use shred when deleting old log files. See also shred.
notifempty
Do not rotate the log if it is empty (this overrides the ifempty option).
olddir directory
Logs are moved into directory for rotation. The directory must be on the same physical device as the log file being rotated, unless copy, copytruncate or renamecopy
option is used. The directory is assumed to be relative to the directory holding the log file unless an absolute path name is specified. When this option is used all old
versions of the log end up in directory. This option may be overridden by the noolddir option.
postrotate/endscript
The lines between postrotate and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) after the log file is rotated. These directives
may only appear inside a log file definition. Normally, the absolute path to the log file is passed as first argument to the script. If sharedscripts is specified, whole
pattern is passed to the script. See also prerotate. See sharedscripts and nosharedscripts for error handling.
prerotate/endscript
The lines between prerotate and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) before the log file is rotated and only if the
log will actually be rotated. These directives may only appear inside a log file definition. Normally, the absolute path to the log file is passed as first argument to
the script. If sharedscripts is specified, whole pattern is passed to the script. See also postrotate. See sharedscripts and nosharedscripts for error handling.
firstaction/endscript
The lines between firstaction and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) once before all log files that match the wild‐
carded pattern are rotated, before prerotate script is run and only if at least one log will actually be rotated. These directives may only appear inside a log file def‐
inition. Whole pattern is passed to the script as first argument. If the script exits with error, no further processing is done. See also lastaction.
lastaction/endscript
The lines between lastaction and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) once after all log files that match the wild‐
carded pattern are rotated, after postrotate script is run and only if at least one log is rotated. These directives may only appear inside a log file definition. Whole
pattern is passed to the script as first argument. If the script exits with error, just an error message is shown (as this is the last action). See also firstaction.
preremove/endscript
The lines between preremove and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) once just before removal of a log file. The
logrotate will pass the name of file which is soon to be removed. See also firstaction.
rotate count
Log files are rotated count times before being removed or mailed to the address specified in a mail directive. If count is 0, old versions are removed rather than
rotated.
size size
Log files are rotated only if they grow bigger then size bytes. If size is followed by k, the size is assumed to be in kilobytes. If the M is used, the size is in
megabytes, and if G is used, the size is in gigabytes. So size 100, size 100k, size 100M and size 100G are all valid.
sharedscripts
Normally, prerotate and postrotate scripts are run for each log which is rotated and the absolute path to the log file is passed as first argument to the script. That
means a single script may be run multiple times for log file entries which match multiple files (such as the /var/log/news/* example). If sharedscripts is specified, the
scripts are only run once, no matter how many logs match the wildcarded pattern, and whole pattern is passed to them. However, if none of the logs in the pattern require
rotating, the scripts will not be run at all. If the scripts exit with error, the remaining actions will not be executed for any logs. This option overrides the noshared‐
scripts option and implies create option.
shred Delete log files using shred -u instead of unlink(). This should ensure that logs are not readable after their scheduled deletion; this is off by default. See also
noshred.
shredcycles count
Asks GNU shred(1) to overwrite log files count times before deletion. Without this option, shred's default will be used.
start count
This is the number to use as the base for rotation. For example, if you specify 0, the logs will be created with a .0 extension as they are rotated from the original log
files. If you specify 9, log files will be created with a .9, skipping 0-8. Files will still be rotated the number of times specified with the rotate directive.
su user group
Rotate log files set under this user and group instead of using default user/group (usually root). user specifies the user name used for rotation and group specifies the
group used for rotation.
tabooext [+] list
The current taboo extension list is changed (see the include directive for information on the taboo extensions). If a + precedes the list of extensions, the current taboo
extension list is augmented, otherwise it is replaced. At startup, the taboo extension list contains .rpmsave, .rpmorig, ~, .disabled, .dpkg-old, .dpkg-dist, .dpkg-new,
.cfsaved, .ucf-old, .ucf-dist, .ucf-new, .rpmnew, .swp, .cfsaved, .rhn-cfg-tmp-*
weekly Log files are rotated if the current weekday is less than the weekday of the last rotation or if more than a week has passed since the last rotation. This is normally the
same as rotating logs on the first day of the week, but it works better if logrotate is not run every night.
yearly Log files are rotated if the current year is not the same as the last rotation.